Desain Penyiram Tanaman Otomatis Berbasis Arduino Menggunakan Sensor Kelembaban Tanah
DOI:
https://doi.org/10.30865/klik.v3i5.701Keywords:
Sensor Soil Moisture; Arduino Uno; Driver Relay; AutomaticAbstract
In line with the development of an increasingly advanced era, humans also expect a tool or technology that can help and facilitate in carrying out daily work. The technology developed varies according to the desired field. Both in the fields of education, communication, health and even in the fields of agriculture and food. One application of technology that can meet human needs in the field of food and agriculture is an automatic plant watering system. This system is designed to replace manual work to become automatic when watering plants. The expected benefit of this system is that the system can facilitate human work in watering plants so that it is more effective and efficient. This system consists of a Soil Moisture Sensor, Arduino Uno Microcontroller, Riley Driver, Pompa Air and LCD. The Soil Moisture Sensor system will be used to detect soil moisture. After reading the soil moisture value, the data will be sent to Arduino Uno, then Arduino will give an order to turn on/off the relay driver. Then the Relay Driver will set the conditions so that the pump can automatically water the water according to the needs of the plants. The results of this study indicate that the system works well, where the readable data will be displayed on the LCD. The automatic plant sprinkler system can work well to automatically water the plants when the soil moisture reading is below 60%
Downloads
References
P. P. Dan and J. Setiawan, “PANDANGANNYA TERHADAP ILMU PENGETAHUAN,” vol. 28, no. 1, pp. 25–46, 2018, doi: 10.22146/jf.33296.
M. Mukhsin, “Peranan Teknologi Informasi Dan Komunikasi Menerapkan Sistem Informasi Desa Dalam Publikasi Informasi Desa Di Era Globalisasi,” Teknokom, vol. 3, no. 1, pp. 7–15, 2020, doi: 10.31943/teknokom.v3i1.43.
M. Danuri, “PERKEMBANGAN DAN TRANSFORMASI,” pp. 116–123, 2019.
Kadir, Abdul., and T. Wahyuni., “Pengenalan Teknologi Informasi,” no. April, p. 45, 2013.
L. A. Abdillah et al., No Title.
J. Volume, N. Tahun, J. Pendidikan, and I. A. Huda, “Research & Learning in Primary Education Perkembangan Teknologi Informasi dan Komunikasi ( TIK ) Terhadap Kulaitas Pembelajaran Di Sekolah Dasar,” vol. 2, 2020.
B. W. Nuryadin and K. Khairurrijal, “Fabrikasi Material Nanokomposit Superkuat , Ringan dan Transparan Menggunakan Metode Simple Mixing,” no. June 2014, 2008.
Syafii, A. Luthfi, and A. Y. A. Rozzi, “Design of raspberry pi web-based energy monitoring system for residential electricity consumption,” 2020 Int. Conf. Inf. Technol. Syst. Innov. ICITSI 2020 - Proc., pp. 192–196, 2020, doi: 10.1109/ICITSI50517.2020.9264926.
Y. A. Rozzi and A. Luthfi, “Dual Server Implementation for Improving Reliability of Online Energy Monitoring System,” Int. J. Adv. Trends Comput. Sci. Eng., vol. 9, no. 5, pp. 8835–8839, 2020, doi: 10.30534/ijatcse/2020/277952020.
W. F. Wardhiani, “Peran Politik Pertanian dalam Pembangunan Pertanian menghadapi Era Revolusi Industri 4.0 di Sektor Pertanian,” JISIPOL | J. Ilmu Sos. dan Ilmu Polit., vol. 3, no. 2, pp. 83–94, 2019.
S. Penyiraman Tanaman Otomatis Berbasis Mikrokontroler Arduino Uno Pada Toko Tanaman Hias Yopi Rahmat Tullah and A. Hendra Setyawan, “Dosen STMIK Bina Sarana Global, 3 Mahasiswa STMIK Bina Sarana Global,” vol. 9, no. 1, pp. 2088–1762, 2019.
C. W. Silalahi et al., “Pengaruh jarak tanam dan varietas bawang merah (Allium ascalonicum L.) pada sistem tanam tumpangsari dengan tomat (Solanum esculentum L.) oterhadap hasil kedua tanaman,” J. Produksi Tanam., pp. 1–7, 2020.
L. . F. A. Caesar Pats Yahwe, Isnawaty, “Rancang Bangun Prototype System Monitoring Kelembaban Tanah Melalui Sms Berdasarkan Hasil Penyiraman Tanaman System Monitoring Kelembaban Tanah Melalui Sms Berdasarkan Hasil Penyiraman Tanaman,” semanTIK, vol. 2, no. 1, pp. 97–110, 2016, doi: doi: 10.1016/j.ccr.2005.01.030.
E. D. Putra, M. Utami, and A. G. Setiawan, “Penyiram Tanaman Otomatis Sensor Kelembaban Tanah Yl-39, Yl-69 Dan GSM Shield Atwin Quad-Band,” INTECOMS J. Inf. Technol. Comput. Sci., vol. 3, no. 2, pp. 141–151, 2020, doi: 10.31539/intecoms.v3i2.1517.
W. A. Prayitno, A. Muttaqin, and D. Syauqy, “Sistem Monitoring Suhu, Kelembaban, dan Pengendali Penyiraman Tanaman Hidroponik menggunakan Blynk Android,” J. Pengemb. Teknol. Inf. dan Ilmu Komput., vol. 1, no. 4, pp. 292–297, 2017.
A. Ulinuha and A. G. Riza, “Sistem Monitoring Dan Penyiram Tanaman Otomatis Berbasis Android Dengan Aplikasi Blynk,” Abdi Teknoyasa, vol. 2, no. 1, pp. 26–31, 2021, doi: 10.23917/abditeknoyasa.v2i1.318.
D. Sasmoko, “Sistem Monitoring aliran air dan Penyiraman Otomatis Pada Rumah Kaca Berbasis IoT dengan Esp8266 dan Blynk,” CIRCUIT J. Ilm. Pendidik. Tek. Elektro, vol. 4, no. 1, p. 1, 2020, doi: 10.22373/crc.v4i1.6128.
H. Husdi, “Monitoring Kelembaban Tanah Pertanian Menggunakan Soil Moisture Sensor Fc-28 Dan Arduino Uno,” Ilk. J. Ilm., vol. 10, no. 2, pp. 237–243, 2018, doi: 10.33096/ilkom.v10i2.315.237-243.
J. Tarigan and M. Bukit, “Rancang Bangun Sistem Penyiraman Tanaman Secara Mandiri Berbasis Mikrokontroller Atmega 8535,” J. Fis. Fis. Sains dan Apl., vol. 3, no. 3, pp. 137–141, 2018, doi: 10.35508/fisa.v3i3.615.
B. Gsm et al., “Rancang Bangun Sistem Monitoring Kelembaban Tanah dan Suhu Udara,” J. Kumparan Fis., vol. 1, no. 2, pp. 60–65, 2018.
Bila bermanfaat silahkan share artikel ini
Berikan Komentar Anda terhadap artikel Desain Penyiram Tanaman Otomatis Berbasis Arduino Menggunakan Sensor Kelembaban Tanah
ARTICLE HISTORY
Issue
Section
Copyright (c) 2023 Yoli Andi Rozzi, Jhoanne Fredricka, Kelik Sussolaikah
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).
