Penerapan Metode Multi Factor Evaluation Process Dalam Penilaian Kinerja Karyawan Bagian Produksi CNC
DOI:
https://doi.org/10.30865/klik.v4i5.1785Keywords:
Performance Assessment; DSS; MFEP; CNCAbstract
Reflecting on the problems that have occurred previously due to the company's lack of managing its human resources properly, causing chaos in the production department. This problem arises because in the company there are too many PKWT (Specified Time Work Agreement) employees working, causing instability in the production line. When PKWT's work period was about to end, many prospective replacement employees resigned during the training stage because they could not stand the pressure of working in hot room temperatures in making wheel rims. This causes the company to have to look for other candidates which will take many time, while production must continue as usual. Of course, this will have a negative impact on the company if it continues in the future. Therefore, good human resource management is needed to ensure that the Company's goals are achieved efficiently and effectively. One of the things that must be done in managing human resources is monitoring and viewing employee performance. Because by knowing the performance of the Company's employees, you can ensure that tasks are carried out to predetermined standards and achieve optimal results. Employee performance assessments are carried out in the CNC section, especially on production results. This assessment aims to assess employee performance objectively and fairly, so that it can be used as an evaluation for decision making such as contract extensions, the appointment of permanent employees, promotions, and others. This performance assessment can certainly really help companies manage their human resources and reduce the impact of company losses in the future. Apart from that, this assessment is very important for a company to ensure the creation of a good quality product. The author uses a computerized system using Python and the Multi Factor Evaluation Process method to evaluate employee performance. The reason the author uses this method is because of its ability to make precise judgments based on predetermined criteria values. The data in this research is CNC production data recorded for one month. By assessing 46 employees based on data on Total Production, OK Goods (according to SOP), and Reject Goods (Not Good). The results of implementing MFEP in this performance assessment produced the highest score of 9.2 while the lowest score was 3.0.
Downloads
References
J. M. Sagita Putri, P. Korespondensi, A. Thyo Priandika, and Y. Rahmanto, “Sistem Informasi Administrasi Surat Menyurat Pada Kantor Balai Desa Jatimulyo,” CHAIN?: Journal of Computer Technology, vol. 1, no. 1, pp. 1–6, Jan. 2023, doi: https://doi.org/10.58602/chain.v1i1.1.
M. B. A. Pratama, S. S. Hilabi, M. M. Ihsan, I. Ferdiansyah, and H. S. Nizar, “Application of the Waterfall Method in Creating Payroll Applications Based on Java Netbeans,” Jurnal Multimedia dan Teknologi Informasi (Jatilima), vol. 6, no. 01, pp. 35–45, Mar. 2024, doi: 10.54209/jatilima.v6i01.432.
M. N. D. Satria, “Sistem Pendukung Keputusan Penerimaan Staff Administrasi Menggunakan Metode VIKOR,” Journal of Artificial Intelligence and Technology Information (JAITI), vol. 1, no. 1, pp. 39–49, Feb. 2023, doi: https://doi.org/10.58602/jaiti.v1i1.24.
E. Khoiril Ulama, A. Thyo Priandika, and F. Ariany, “SISTEM PENDUKUNG KEPUTUSAN PEMILIHAN SAPI SIAP JUAL (TERNAK SAPI LEMBU JAYA LESTARI LAMPUNG TENGAH) MENGGUNAKAN METODE SAW,” Jurnal Informatika dan Rekayasa Perangkat Lunak (JATIKA), vol. 3, no. 2, pp. 138–144, Jun. 2022, doi: https://doi.org/10.33365/jatika.v3i2.2022.
G. Lestari and A. Savitri Puspaningrum, “SISTEM PENDUKUNG KEPUTUSAN PEMBERIAN TUNJANGAN KARYAWAN MENGGUNAKAN METODE ANALYTICAL HIERARCHY PROCESS (AHP) STUDI KASUS: PT MUTIARA FERINDO INTERNUSA,” Jurnal Teknologi dan Sistem Informasi (JTSI), vol. 2, no. 3, pp. 38–48, Sep. 2021, doi: https://doi.org/10.33365/jtsi.v2i3.860.
Tukino, M. Rizky Arfani, A. Hananto, and B. Huda, “Seleksi Penerimaan Bantuan Internet Gratis dengan Menggunakan Metode AHP,” INTERNAL (Information System Journal, vol. 6, no. 1, pp. 1–9, Jun. 2023, doi: https://doi.org/10.32627/internal.v6i1.736.
S. Setiawansyah, “Sistem Pendukung Keputusan Rekomendasi Tempat Wisata Menggunakan Metode TOPSIS,” Jurnal Ilmiah Informatika dan Ilmu Komputer (JIMA-ILKOM), vol. 1, no. 2, pp. 54–62, Sep. 2022, doi: https://doi.org/10.58602/jima-ilkom.v1i2.8.
J. Hutagalung and M. T. Indah R, “Pemilihan Dosen Penguji Skripsi Menggunakan Metode ARAS, COPRAS dan WASPAS,” Jurnal Sisfokom (Sistem Informasi dan Komputer), vol. 10, no. 3, pp. 354–367, Nov. 2021, doi: https://doi.org/10.32736/sisfokom.v10i3.1240.
I. Ismail and I. Irma, “Implementasi Algoritma Multi Factor Evaluation Process Pada Seleksi Pengangkatan Aparat Desa Timusu Kecamatan Liliriaja Kabupaten Soppeng,” Jurnal Ilmiah Sistem Informasi dan Teknik Informatika (JISTI), vol. 5, no. 2, pp. 9–16, Oct. 2022, doi: https://doi.org/10.57093/jisti.v5i2.122.
W. A. Ramadhani, N. Irawati, and C. Maulana, “Penerapan Metode Multifactor Evaluation Process (MFEP) Untuk Menentukan Kelayakan Penerima Bantuan Pinjaman Modal Usaha Kecil Menengah,” Building of Informatics, Technology and Science (BITS), vol. 4, no. 1, pp. 50–59, Jun. 2022, doi: https://doi.org/10.47065/bits.v4i1.1490.
D. N. Huda and M. T. Margianto, “Sistem Pendukung Keputusan Pada Aplikasi Penyedia Layanan Internet Terbaik Menggunakan Metode Multi Factor Evaluation Process,” Bangkit Indonesia, vol. XI, no. 01, pp. 30–39, Mar. 2022, doi: https://doi.org/10.52771/bangkitindonesia.v11i1.208.
N. W. Asbara and S. Syuryadi, “Penerapan Metode MFEP (Multifactor Evaluation Process) Dalam Seleksi Karyawan,” Jurnal Sistem Komputer dan Informatika (JSON), vol. 3, no. 4, pp. 516–521, Jun. 2022, doi: http://dx.doi.org/10.30865/json.v3i4.4228.
B. Huda, S. Shofiah Hilabi, and M. Rahayuningsih, “Android Based Employee Absence and Leaving Application Information System,” Buana Information Technology and Computer Sciences (BIT and CS), vol. 2, no. 1, pp. 11–16, Jan. 2021, doi: https://doi.org/10.36805/bit-cs.v2i1.1243.
I. Fazri, “Penerapan Metode Multi Factor Evaluation Process (MFEP) Pada Penilaian Kinerja Kolektor Dalam Pengumpulan Dana Kredit Sepeda Motor,” Jurnal Sistem Komputer dan Informatika (JSON), vol. 2, no. 2, pp. 110–114, Jan. 2021, doi: http://dx.doi.org/10.30865/json.v2i2.2449.
H. Gilbert Simanullang and A. Prima Silalahi, “SISTEM KUESIONER PENILAIAN KINERJA GURU MENGGUNAKAN METODE MULTIFACTOR EVALUATION PROCESS PADA SMP NEGERI 3 BINJAI BERBASIS FRAMEWORK CODEIGNITER,” Jurnal Informatika Kaputama, vol. 4, no. 2, pp. 149–157, Jul. 2020, doi: https://doi.org/10.59697/jik.v4i2.326.
Agustian Adittia, Tukino, and F. Nurapriani, “PENERAPAN ANALISIS SENTIMEN DAN NAIVE BAYES TERHADAP OPINI PENGGUNAAN KENDARAAN LISTRIK DI TWITTER,” Jurnal Teknik Informatika Aceh (Jurnal TIKA), vol. 7, no. 3, pp. 243–239, Dec. 2022, doi: https://doi.org/10.51179/tika.v7i3.1550.
Shofa Shofiah Hilabi and Nuryati, “Sistem Pendukung Keputusan pemilihan Brand Supplier terbaik menggunakan Metode Simple Additive Weighting (SAW) Pada Matahari Dept.Store),” Karawang, Feb. 2021. [Online]. Available: https://journal.ubpkarawang.ac.id/index.php/ProsidingKNPP/article/view/1562
A. Hananto, M. R. Arfani, and S. Aripiyanto, “Seleksi Penerimaan Bantuan Internet Gratis dengan Metode AHP,” Jurnal Informatika Utama, vol. 1, no. 1, pp. 24–27, Jun. 2023, doi: https://doi.org/10.55903/jitu.v1i1.73.
B. Priyatna, A. Hananto, A. Solehudin, A. L. Hananto, and N. Heryana, “Determining the Formulation of Mosquito Repellent Production Raw Materials Using Simple Additive Weighting (SAW),” Bikaner, May 2023. [Online]. Available: https://ijisae.org/index.php/IJISAE/article/view/2873
Maharina Maharina, J. Sasmito, and C. Zonyfar, “The Electronic and Transactions Law (EIT Law) as the First Cyber crime Law in Indonesia: An Introduction and Its Implementation,” Pena Jutisia: Media Komunikasi Dan Kajian Hukum, vol. 21, no. 2, pp. 345-362, Feb. 2022. doi: http://dx.doi.org/10.31941/pj.v21i2.2680.
E. Novalia, A. Voutama, and S. Susanto, “Sales System Using Apriori Algorithm to Analyze Consumer Purchase Patterns,” Buana Information Technology and Computer Sciences (BIT and CS) 22 |, vol. 3, no. 1, pp. 22–27, Jan. 2022, doi: https://doi.org/10.36805/bit-cs.v3i1.2049.
B. H. Siregar, F. Helmiah, and W. M. Kifti, “Implementasi Metode Multi Factor Evaluation Process (MFEP) Pada Sistem Penilaian Kinerja Kelurahan di Kecamatan,” Building of Informatics, Technology and Science (BITS), vol. 4, no. 1, pp. 28–37, Jun. 2022, doi: https://doi.org/10.47065/bits.v4i1.1479.
L. Ersa, I. S. F. Al Afif, and S. Hidayatulloh, “Sistem Pendukung Keputusan Penentuan Produk Otomasi Paling Diminati Dengan Metode Multi Factor Evaluation Process,” Paradigma - Jurnal Komputer dan Informatika, vol. 24, no. 1, pp. 37–46, Mar. 2022, doi: https://doi.org/10.31294/paradigma.v24i1.971.
Bila bermanfaat silahkan share artikel ini
Berikan Komentar Anda terhadap artikel Penerapan Metode Multi Factor Evaluation Process Dalam Penilaian Kinerja Karyawan Bagian Produksi CNC
ARTICLE HISTORY
Issue
Section
Copyright (c) 2024 Muhamad Bayu Aditya Pratama, Tukino, Baenil Huda, Shofa Shofiah Hilabi
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).
