Penerapan Metode Simple Additive Weighting dalam Penentuan Prioritas Program Pembangunan Daerah
DOI:
https://doi.org/10.47065/jieee.v3i2.1542Keywords:
DSS; SAW Method; Program PriorityAbstract
Regional governments and institutions related to preparing regional development programs experience several obstacles in determining regional development work plans, one of which is difficulty in determining development priorities that are in line with regional regulations. The effectiveness and efficiency of implementing regional development programs depends on the accuracy of the data collected. One of the challenges faced by the Medan City Regional Development Planning Agency is the lack of consideration of the priority scale and fairness in the regional development stages, as well as the absence of a system that can help determine the priority scale. Therefore, this research requires a decision support system (DSS). In the SPK, there are many solution methods that can be used according to the needs of each problem. In this research, to determine regional development program priorities, the SAW method will be used. Of the 10 proposed regional programs, only one will be a priority development program. After applying the SAW method in making decisions, the development program that has the highest priority level is the highway construction program with the final result obtained, namely 0.77705.
Downloads
References
D. C. Hartini, E. L. Ruskan, and A. Ibrahim, “Sistem Pendukung Keputusan Pemilihan Hotel Di Kota Palembang Dengan Metode Simple Additive Weighting (SAW),” J. Sist. Inf., vol. 5, no. 1, pp. 546–565, 2013.
T. Limbong et al., Sistem Pendukung Keputusan: Metode & Implementasi. Medan: Yayasan Kita Menulis, 2020.
D. Nofriansyah, Konsep Data Mining Vs Sistem Pendukung Keputusan. 2015.
P. Oktavia, “Sistem Pendukung Keputusan Seleksi Penerima Beasiswa dengan Metode Weighted Product pada SMP Negeri 1 Parung Berbasis Web,” J. Inform. Univ. Pamulang, vol. 3, no. 2, p. 80, 2018.
Jasri, D. Siregar, and R. Rahim, “Decision Support System Best Employee Assessments with Technique for Order of Preference by Similarity to Ideal Solution,” Int. J. Recent TRENDS Eng. Res., vol. 3, no. 3, pp. 6–17, 2017.
L. Fajar Israwan, M. Mukmin, and S. Ardiansyah, “Penentuan Karyawan Berprestasi Menggunakan Metode Multi Attribute Utility Theory (Maut),” J. Inform., 2018.
F. Frieyadie, “Penerapan Metode Simple Additive Weight (Saw) Dalam Sistem Pendukung Keputusan Promosi Kenaikan Jabatan,” J. Pilar Nusa Mandiri, vol. 12, no. 1, pp. 37–45, 2016.
A. Setiadi, Y. Yunita, and A. R. Ningsih, “Penerapan Metode Simple Additive Weighting(SAW) Untuk Pemilihan Siswa Terbaik,” J. Sisfokom (Sistem Inf. dan Komputer), vol. 7, no. 2, p. 104, 2018.
H. Hermanto and N. Izzah, “Sistem Pendukung Keputusan Pemilihan Motor Dengan Metode Simple Additive Weighting (SAW),” Mat. Dan Pembelajaran, vol. 6, no. 2, p. 184, 2018.
M. Elistri, J. Wahyudi, and R. Supardi, “Penerapan Metode Saw Dalam Sistem Pendukung Keputusan Pemilihan Jurusan Pada Sekolah Menengah Atas Negeri 8 Seluma,” J. Media Infotama Penerapan Metod. SAW… ISSN, vol. 10, no. 2, pp. 1858–2680, 2014.
Bappenas, “Rancangan Teknokratik Rencana Pembangunan Jangka Menengah Nasional 2020 - 2024?: Indonesia Berpenghasilan Menengah - Tinggi Yang Sejahtera, Adil, dan Berkesinambungan,” Kementeri. PPN/ Bappenas, p. 313, 2019.
M. R. Ramadhan, M. K. Nizam, and Mesran, “Penerapan Metode SAW (Simple Additive Weighting) Dalam Pemilihan Siswa-Siswi Berprestasi Pada Sekolah SMK Swasta Mustafa,” TIN Terap. Inform. Nusant., vol. 1, no. 9, pp. 459–471, 2021.
R. Rusliyawati, D. Damayanti, and S. N. Prawira, “Implementasi Metode Saw Dalam Sistem Pendukung Keputusan Pemilihan Model Social Customer Relationship Management,” Edutic - Sci. J. Informatics Educ., vol. 7, no. 1, pp. 12–19, 2020.
Asminah, “Penerapan Metode Simple Additive Weigthing Untuk Penentuan Level Kondisi Penyandang Disabilitas,” Build. Informatics, Technol. Sci., vol. 3, no. 4, pp. 559–565, 2022.
S. H. Sahir, R. Rosmawati, and K. Minan, “Simple Additive Weighting Method to Determining Employee Salary Increase Rate,” Int. J. Sci. Res. Sci. Technol., vol. 3, no. 8, pp. 42–48, 2017.
R. P. Sari and E. Rasimin, “Sistem Pendukung Keputusan Pemilihan Kategori Skripsi Bagi Mahasiswa Sistem Informasi,” J. Sist. Komput. dan Inform., vol. 2, no. 3, pp. 339–347, 2021.
S. Yudha Prayogi, “Penerapan Metode Simple Additive Weighting Dalam Pemilihan Tablet Pc Untuk Pemula,” CESSJournal Comput. Eng. Syst. Sci., vol. 1, no. 1, pp. 35–40, 2016.
Bila bermanfaat silahkan share artikel ini
Berikan Komentar Anda terhadap artikel Penerapan Metode Simple Additive Weighting dalam Penentuan Prioritas Program Pembangunan Daerah
ARTICLE HISTORY
Issue
Section
Copyright (c) 2023 Jaya Sari Anggraini Siagian, Bister Purba, Erlin Windia Ambarsari, Hetty Rohayani
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).
